Edmonton Masonry

Step-by-Step Guide to Building a Brick Patio

Building a brick patio is like putting together a beautiful puzzle. With a bit of planning and a few supplies, you can create a stunning outdoor space that you and your family can enjoy for years to come.

Follow this step-by-step guide to build a brick patio that will have your neighbors green with envy.

You’ll need to assess your site and needs, purchase the right supplies, prepare the foundation, lay the bricks, and finish and maintain your patio.

Let’s get started!

Assess Site and Needs

Before beginning your brick patio project, assess your site and determine what you need to create the patio you desire. Planning ahead and budgeting costs are essential for a successful project. Measure your patio area and calculate the amount of materials needed, such as bricks, sand, and gravel.

Consider the climate and weather conditions of your area to choose the most suitable type of brick. Decide on a design, and make sure it fits within your budget. Sketch out your design on paper and consider how each step of the process will impact the overall look of the patio.

Research any necessary permits and regulations that may be required for your project. Be sure to consider any other factors that could impact the construction process, such as the slope of the land, access to electricity or water, or the presence of underground pipes or cables.

With proper planning and budgeting, you can create a beautiful brick patio that will last for years to come.

Purchase Supplies

Once you have determined your needs and budget, it’s time to purchase the necessary supplies for your brick patio project. Planning your budget and choosing the materials should be done before making a trip to the store.

Make sure that you have a detailed list of your supplies, including the number of bricks, sand, and any other materials you may need. It’s important to know the measurements of the area where you’ll be laying the bricks and how much material you’ll need.

Some materials may require special ordering, so be sure to plan ahead and allow extra time for those items. Also, don’t forget to factor in any tools you may need, such as shovels, trowels, and safety goggles.

Lastly, be sure to purchase extra materials to use as a reference in case you need to replace any bricks or other materials during the installation process.

Prepare Foundation

Preparing the foundation is essential for the success of your brick patio project. Before you start, be sure to:

  1. Gather information about your specific area and climate.
  2. Consider alternatives to the traditional brick patio.
  3. Measure the area and mark the boundaries.
  4. Level the ground by removing any obstructions or filling in low spots.

Be sure to take your time and give your project the foundation it needs for success. With the right preparation, your brick patio will be a long-lasting and attractive addition to your outdoor space.

Lay Bricks

Now that you’ve prepared the foundation, it’s time to start laying your bricks.

Before you begin, it’s important to plan ahead and choose the right materials. Be sure you have enough bricks to complete the project, as well as the necessary tools, such as a level, a trowel, a rubber mallet, and sand.

Start by laying the first row of bricks along the edge of the foundation. Make sure each brick is level with the others, using the level to check. Place a thin layer of sand between each brick to create a cushion.

Once the first row is complete, start the second row, setting the bricks with the ends offset from the first row. Repeat this process until the patio is complete.

Using a trowel, fill any gaps between the bricks with sand, and finish with a rubber mallet to ensure the bricks are level.

Now you have a beautiful brick patio to enjoy.

Finish and Maintain

Your patio’s longevity depends on its proper maintenance. To ensure your patio looks its best, and lasts for years to come, here are a few key tips:

  1. Regularly clean your patio by sweeping, and scrubbing heavily-soiled areas.
  2. Apply sealer every few years, or when you notice discoloration in the bricks.
  3. Re-point any loose or crumbling mortar joints.
  4. Cover your patio with a tarp during cold weather, and snowfall.

Taking these steps will help to protect your patio from the elements and ensure that it remains looking its best.

Additionally, you should seek professional advice from a mason for more complex sealing and cleaning tips. With regular maintenance, your brick patio will be a lasting and beautiful addition to your outdoor space.


With the right supplies and a little elbow grease, you can turn any outdoor space into a beautiful brick patio.

With just a few simple steps, you’ll have a patio that you can be proud of and that will last for years to come.

So don’t be afraid to take the plunge and really put your back into it – you’ll be glad you did in the long run.

Check our Top 5 Signs you need masonry Blog Page

Patio Contractors Near Me
Patios Near Me
Seraphinite AcceleratorOptimized by Seraphinite Accelerator
Turns on site high speed to be attractive for people and search engines.